UnionTech RSPro 600

RSPro 600

A New Dimension in Stereolithography 3D Printing

 

  • Cost-effective ownership throughout entire life cycle.

  • Freedom to collaborate and innovate: open design for materials and machine access.

  • Printed parts demonstrate excellent sidewall quality and fine detail, contributing to lower post-finishing requirements.

UnionTech RSPro 600 in your industry.

1/12

UnionTech RSPro 600 Materials.

The UnionTech™ equipment is compatible with all 355 nanometer wavelength photopolymer formulations designed and qualified for stereolithography. The equipment operator is responsible for the selection of the SL material that best satisfies their application’s needs so you can have the freedom to collaborate and innovate: open design for materials and machine access.

Specifications.

Build Envelope Capacity:   23.6 × 23.6 × 19.7 in
                                              (600 × 600 × 500 mm)
Maximum Part Weight:    169.8 lb (77 kg)
Accuracy:                            Part size < 3.9 in (100 mm):
                                             ±0.004 in (±0.1 mm)
                                             Part size ≥ 3.9 in (100 mm):
                                             ±0.1% x L

Beam Size:                         Nominal 0.005 -0.008 in
                                             (0.12 - 0.20mm)
Scanning Speed:               15m/s (Maximum);
                                             6-10m/s (Typical)
Layer Thickness:                0.002 in (0.05 mm) minimum;
                                             0.01 in (0.25 mm) maximum
Weight:                                3968 lb (1,800 kg)
                                             (with 728 lb (330 kg) initial fill inside)
Machine Size (WxDxH):    62.9 x 63.5 x 83.5 in
                                             (1598 x 1612x 2121 mm)

md_5a985566bec03_edited.png
md_5a985566bec03_edited.png
md_5a985566bec03_edited.png
md_5a985566bec03_edited.png

All rights reserved © 2020 MAPTEC | Warranty Terms | Privacy Policy