UnionTech Lite series of industrial 3D printing equipment brings a fresh dimension to stereolithography. The machines offer an open machine design that allows you to use the type of material you need, while superior part quality creates ultra-smooth surfaces and fine details. The products also deliver cost-effective solutions throughout the entire equipment lifecycle.
UnionTech 3D printer is robustly constructed for low cost of ownership from the initial purchase onward while producing the highest quality parts. Parts produced on UnionTech SL equipment are highly accurate with excellent feature resolution and full density, smooth surfaces.
DSM Somos materials have been 25 years in the making, a deep understanding of the complex and demanding applications that different industries demand has created class leading high performance materials for many different industry verticals such as tooling, investment casting, high temperature or end-use parts.
Polydevs 3D Print Preparation Software for a cost effective software for all 3D printing preparation needs
UnionTech’s unique approach to the market allowing a free and open 3d printing system allows for Europac3D to bring together an SLA printer that delivers the highest quality parts that are precise and have extremely good sidewall quality. The combination of Uniontech build quality and Somos high performance materials delivers a system that raises the bar in the SLA market.
Build Envelope Capacity: 800 × 800 × 550 mm
Maximum Part Weight: 150 kg
Accuracy: Part size < 100 mm: ±0,1 mm; Part size ≥ 100 mm: ±0,15% x L
Accuracy may vary depending onparameters, part geometry and size, pre-processing or post-processing methods, materialsand environment.
Beam Size: Nominal 0,12 -0,20 mm
Scanning Speed: 15 m/s (Maximum), 6 -10m/s (Typical)
Layer Thickness: 0.07 mm minimum; 0.25 mm maximum
Weight: 2000 kg (with 560 kg initial fill inside)
Machine Size (WxDxH): 1798×1602×2118 mm
Laser: Solid-state frequency tripled Nd: YVO₄
Wavelength: 355 nm
Controller: UnionTech™ RSCON
Part Preparation: Materialise Magics or Polydevs
Operating Systems: Windows 7, Windows 10
Input Data File Format: STL
Network Type and Protocol: Ethernet, IEEE 802.3 using TCP/IP and NFS
Electrical Requirements: 200-240 VAC,50/60 Hz,single phase
Laser Warranty: 5.000 hours or 15 months (whichever comes first)
Base Plate/Recoater Rim: Granite
Systems Control: Closed-loop
Power (nominal): Typically 300 ~500mW (@100kHz) on the target surface of the material under nominal optical path condition
Temperature Range: 22–26°C
Maximum Change Rate: 1 °C/hour
Relative Humidity: < 40 % non-condensing
Platform Change Carts: Manual offload cart optional
Processing and Finishing: Post-Curing Unit
System Warranty: One-year warranty (under UnionTech’s Purchase Terms and Conditions)