PolyMide™ PA6-GF

PolyMide™ is a family of Nylon/polyamide-based filaments. Produced with Polymaker’s Warp-Free™ technology, PolyMide™ filaments deliver engineering properties intrinsic to Nylon and ease of printing.

PolyMide™ PA6-GF is a glass fiber reinforced PA6 (Nylon 6) filament. The material exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion.

Available Colors:
 
Grey
Diameter Size:
 
1.75 mm, 2.85 mm
Net Weight:
 
500 g, 2 kg
Buy now
Print Settings
Nozzle Temperature:
280˚C – 300˚C *
Printing Speed:
30mm/s – 60mm/s
Bed Temperature
25˚C – 50˚C (Do NOT exceed 50 ˚C)
Bed Surface:
Almost any surface with a thin coat of PVA glue or Magigoo PA
Cooling Fan:
OFF
Mechanical Properties
Young's Modulus:
4431 ± 184 (MPa)
Tensile Strength:
84.5 ± 2.1 (MPa)
Elongation at Break:
Shore Hardness:
Bending Strength:
136.4 ± 1.6 (MPa)
Charpy Impact:
16.5 ± 0.5 (kJ/m2)
Thermal Propertises
Glass Transition Temperature:
Vicat Softening Temperature:
Melting Temperature:
215 (°C)
Notes
Drying Settings:
100˚C for 8h
Recommended Support Materials
30mm/s – 60mm/s
Other:
25˚C – 50˚C (Do NOT exceed 50 ˚C)

PolyMide™ PA6 GF features Polymaker's Warp-Free™ technology and Fiber Adhesion™ technology: Warp-Free™ technology enables the production of Nylon-based filaments that can be 3D printed with excellent dimensional stability and near-zero warpage. This is achieved by the fine control of microstructure and crystallization behavior of Nylon, which enables the material to fully release the internal stress before solidification. Fiber Adhesion™ technology improves the layer adhesion of fiber reinforced materials, by optimizing the surface chemistry of the fibers to achieve better dispersion and bonding to the matrix. This results in better strength along the Z-axis and reduced mechanical anisotropy.

Print Settings
Compatible Material:
Maximum Part Size (Diameter*Height):
Polishing Liquid:
Polishing Time:
Operating Temperature
Storage Temperature:
Power Supply (INPUT):
Power Supply (OUTPUT):
Polysher™ INPUT:
Desiccant Type:
Humidity Range:
Resolution
Response
Temperature Range:
Battery specifications
Operation Manual:
Download

PolyMide™ PA6 GF features Polymaker's Warp-Free™ technology and Fiber Adhesion™ technology: Warp-Free™ technology enables the production of Nylon-based filaments that can be 3D printed with excellent dimensional stability and near-zero warpage. This is achieved by the fine control of microstructure and crystallization behavior of Nylon, which enables the material to fully release the internal stress before solidification. Fiber Adhesion™ technology improves the layer adhesion of fiber reinforced materials, by optimizing the surface chemistry of the fibers to achieve better dispersion and bonding to the matrix. This results in better strength along the Z-axis and reduced mechanical anisotropy.